Skip to content Skip to sidebar Skip to footer

Ge Water Softener Hardness Setting


Ge Water Softener Hardness Setting. The rule of thumb is that a good hardness level should not be higher than 120 to 170 mg/l, i.e., seven to ten grains per gallon of water. Check the water hardness and set your softener’s water hardness to the number you measured.

GE 30,000 Grain Water Softener Store
GE 30,000 Grain Water Softener Store from mrorganicstore.com

Iron content is.039 ppm (according to our water company). Your water softener setting is too low. Consumeraffairs is not a government agency.

To Change The Hardness Setting On Your Whirlpool Water Softener, Locate The Knob Or Dial On The Front Of The Unit.


First, determine what the harness setting should be. So, you may need to adjust the hardness setting. Set the water softener to the same number.

Maybe The Water You Are Getting Is Not At The Same Water Hardness.


Water hardness is determined by the grains per gallon (gpg) in your water. Companies displayed may pay us to be authorized or when you click a link, call a number or fill a form on our site. You can get grains per gallon of your water from a water analysis laboratory.

If Your Softener Has Not Been Programmed Properly To Handle The High Level Of Hardness In This Area, Or If The Hardness Setting Has Been Adjusted Too Low On Your Ge Water Softener, You Won't Have Soft Water.


These are fill, brining, brine rinse, backwash and fast rinse. You can also contact an independent water. Check the water hardness and set your softener’s water hardness to the number you measured.

For Example, If Your Water Hardness Is 30 Gpg, Then You Would Set The Hardness On The Softener To “30.”.


The rule of thumb is that a good hardness level should not be higher than 120 to 170 mg/l, i.e., seven to ten grains per gallon of water. What is the ideal hardness setting for our ge gxsh40v water softener? With a more flavored water softener, you may need to adjust your hardness a little higher because the juice is less effective.

It Was Set To 95.


For best results, set the hardness to the same number as your water supply. If you are on a municipal city water supply, call you local water department for the water hardness. This is usually located near the top of the unit.


Post a Comment for "Ge Water Softener Hardness Setting"